$1,178.29
Self-Priming Pump to Transfer Hot Liquids 95C - 240V (Beer Wort or Wine)—
$1,178.29
The Story
Self-priming pump for wine and wort
- Brass self-priming pumps with side inlet and single-phase motor.
- These pumps are an excellent solution for pumping liquids primarily for their considerable self-priming ability, the ability to work even with constant irrigation and reversal of the flow.
- The pump body has a very tight structure to prevent the contact of the liquid with the engine and possible losses.
- EEM pumps are used in the domestic production of wine beer, in agriculture, gardening and households.
Pump specifications:
- Suction height 6m.
- Possibility of reverse.
- Asynchronous single-phase motor, protection IP 44, with reverse switch.
- Continuous operation. The pump comes with one straight and one knee connection.
- input and output 3/4
Liquid specifications:
- Maximum temperature 95°C
- Maximum density 1,1g/cm3 Non-solid particles (e.g. sand)
- Not viscous Do not use for pumping gasoline, solvent, substances that are at risk of explosion.
Materials:
Pump body: Brass CB754S Impeller: Brass CB754S Shaft: Stainless steel AISI 316 Flange (EEM-20): Stainless steel AISI 316 Gasket: NBR rubber rubber gufero with stainless steel spring O-ring between body and NBR rubber cover Flange seal (only for EEM-20)
Power Supply: Standard 230V/50Hz
Description
Self-priming pump for wine and wort
- Brass self-priming pumps with side inlet and single-phase motor.
- These pumps are an excellent solution for pumping liquids primarily for their considerable self-priming ability, the ability to work even with constant irrigation and reversal of the flow.
- The pump body has a very tight structure to prevent the contact of the liquid with the engine and possible losses.
- EEM pumps are used in the domestic production of wine beer, in agriculture, gardening and households.
Pump specifications:
- Suction height 6m.
- Possibility of reverse.
- Asynchronous single-phase motor, protection IP 44, with reverse switch.
- Continuous operation. The pump comes with one straight and one knee connection.
- input and output 3/4
Liquid specifications:
- Maximum temperature 95°C
- Maximum density 1,1g/cm3 Non-solid particles (e.g. sand)
- Not viscous Do not use for pumping gasoline, solvent, substances that are at risk of explosion.
Materials:
Pump body: Brass CB754S Impeller: Brass CB754S Shaft: Stainless steel AISI 316 Flange (EEM-20): Stainless steel AISI 316 Gasket: NBR rubber rubber gufero with stainless steel spring O-ring between body and NBR rubber cover Flange seal (only for EEM-20)
Power Supply: Standard 230V/50Hz
